Product description
A titanium stem bolt set, sized to suit your existing hardware.
dubee M5 stem bolts use Grade 5 Ti-6Al-4V titanium with matching washers. Each pack contains six bolts in one length and finish, for bicycle stems that accept the specified dimensions and head design.
Choose the length before choosing the finish
All three options use an M5 × 0.8 thread and a 4 mm hex drive. Select 16, 18 or 20 mm by comparing the original hardware with the dimension drawing. Check usable thread engagement, clearance behind the threaded hole and the space around the bolt head and washer. An M5 thread alone does not establish compatibility.
The tapered head is 8.5 mm in diameter and 5 mm high, with a 1 mm washer. All three lengths are available in Raw Titanium, Burnt Blue and Colorful.
Where can these bolts be used?
They are intended for compatible M5 stem applications on road, mountain and gravel bikes. Faceplate and steerer-clamp designs differ, so confirm that the stem manufacturer permits this replacement. These are hex-drive stem bolts, not T25 disc rotor bolts.
Installation matters
Compare the original thread, length, head profile and washer arrangement before fitting. Follow the stem manufacturer’s instructions for fastener material, lubrication or anti-seize, tightening sequence and torque. Do not assume that a titanium replacement uses the same installation conditions as the original bolt. Have a qualified bike mechanic check the fit if anything is uncertain.
What is in the pack?
Six titanium bolts in your selected size and finish, with matching washers. Stem and tools are not included.
